Chrysler 2005 Pacifica Touring Скачать руководство пользователя страница 309 | Manualshive

Страница: 309 / 376

Chrysler 2005 Pacifica Touring Скачать руководство пользователя страница 309

b. If the fluid is cold, the fluid level should be between
the lower two holes in the area marked “COLD”.

If the fluid level indicates low, add sufficient fluid to
bring to the proper level.

CAUTION!

Do not overfill. Dirt and water in the transmission
can cause serious damage. To prevent dirt and water
from entering the transmission after checking or
replenishing fluid, make certain that the dipstick cap
is reseated properly.

Fluid and Filter Changes

Automatic transmission fluid should be changed on all
transmissions as follows:

Normal Usage — No change necessary

Severe Usage (fluid and filter) — 60,000 miles (96 000 km)

Severe Usage is defined as:

•

Police, taxi, limousine, commercial type operation, or
trailer towing where the vehicle driven regularly for
more than 45 minutes of continuous operation.

NOTE:

Refer to Section 8 of this manual for Mainte-

nance Schedules.

If the transmission is disassembled for any reason, the
fluid and filter should be changed.

Special Additives

Do not add any fluid additives to the transmission. The
only exception to this policy is the use of special dyes to
aid in detecting fluid leaks. The use of transmission
sealers should be avoided as they may adversely affect
seals.

MAINTAINING YOUR VEHICLE

309

7

«
...
307
308
309
310
311
...
»

Содержание 2005 Pacifica Touring

























































































































































































































































































































































































Отзывы:

Нет отзывов