Chrysler 2004 Concorde Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 273

Chrysler 2004 Concorde Скачать руководство пользователя страница 73

To Activate:

Push the ON/OFF button to turn the system ON. The
CRUISE light in the instrument cluster will illuminate
when the system is ON.

NOTE:

You must press the ON/OFF button to activate

the system each time the engine is started.

WARNING!

Leaving the Electronic Speed Control system on
when not in use is dangerous. You could accidentally
set the system or cause it to go faster than you want.
You could lose control and have an accident. Always
leave the system OFF when you are not using it.

To Set At A Desired Speed:

When the vehicle has reached the desired speed, and the
system is activated, press and release the SET button.
Release the accelerator and the vehicle will operate at the
selected speed.

To Deactivate:

A soft tap on the brake pedal, pushing the CANCEL
button or normal brake pressure while slowing the
vehicle will deactivate the speed control without erasing
the memory. Pushing the ON/OFF button or turning off
the ignition turns the speed control system off and erases
the memory.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

73

3

«
...
71
72
73
74
75
...
»

Содержание 2004 Concorde


















































































































































































































































































Отзывы:

Нет отзывов