Chrysler 2004 Concorde Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 273

Chrysler 2004 Concorde Скачать руководство пользователя страница 33

WARNING!

Using a seat belt extender when not needed can
increase the risk of injury in a collision. Only use the
extender when the lap belt is not long enough when
it is worn low and snug, and in the recommended
seating positions. Remove and store the extender
when not needed.

Driver and Right Front Passenger Supplemental
Restraint System (SRS) - Airbag

This vehicle has front airbags for both the driver and
front passenger as a supplement to the seat belt restraint
systems. The driver’s front airbag is mounted in the
center of the steering wheel. The passenger’s front airbag
is mounted in the instrument panel, above the glove
compartment. The words SRS AIRBAG are embossed on
the airbag covers.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

33

2

«
...
31
32
33
34
35
...
»

Содержание 2004 Concorde


















































































































































































































































































Отзывы:

Нет отзывов