Chrysler 2004 Concorde Скачать руководство пользователя страница 231

Страница: 231 / 273

5. Connect the wiring connector to the new bulb and
reinstall the assembly.

Center Stop Light

1. Open the trunk and reach up under the package shelf.

2. Turn the bulb socket counterclockwise and remove it
from the housing.

3. Pull the bulb from the socket and replace the bulb.

4. Reinstall the bulb and socket assembly.

Tail, Stop, Back Up, and Turn Signal Lights

1. Open the trunk and remove the fasteners securing the
light housing to the body.

2. Pull the light housing from the body to expose the
wiring socket.

3. Turn the bulb socket counterclockwise to remove from
the housing. Pull the bulb out of the socket and remove
the bulb.

4. Replace the bulb, reinstall the bulb and socket assem-
bly and reattach the light housing.

MAINTAINING YOUR VEHICLE

231

Содержание 2004 Concorde


















































































































































































































































































Результаты поиска

Содержание 2004 Concorde

Отзывы:

Chrysler 2004 Concorde, Руководство пользователя, Страница: 231 / 273

Результаты поиска

Содержание 2004 Concorde

Отзывы: