Chronos Manufactures Andre Belfort AB-8110, Инструкция по эксплуатации

Страница: 9 / 43

Unscrew the crown by turning it counter-clockwise. Wind the watch by
turning the crown clockwise approximately 30 to 40 turns until the second
hand starts to run. Pull the crown carefully to position 2. Set the watch to
7 o’clock by turning the crown counter-clockwise. Unscrew the crown of
the pushers A and B by turning them counter-clockwise. You may set the
current day with button A. With button B you may set the month. Push
the crown carefully to position 1 and set the date by turning the crown
counter-clockwise. Pull the crown carefully to position 2 again and set the
current time by turning the crown counter-clockwise. When finished push
the crown carefully back in to place and bolt it by turning it clockwise.
Important! Never set the date and/or the day between 8 pm and 4
am. The date changing mechanism is active in this period and any
exterior intervention can damage the movement. If it is necessary to
set the date during that time period, first change the time to any time
outside it, set the date/day and then reset the correct time. Please
press the button on your watch slowly and carefully to avoid dama-
ging the mechanism. When the warranty of your watch expires, we
recommend you to send it in for a revision to ensure its longevity.
A revision should optimally be conducted once a year to counteract
general wearout and to maintain the water-resistance of your watch.
EN