page 26 of 47
5
For accurate initialization, make sure you
sit quietly, so that blood pressure is stable.
Take a Polso
TM
Watch measurement within
the next 5 minutes for initialization to be
valid.
6
Taking a Polso Watch Measurement
You should sit comfortably, not talk, and
avoid movement while taking a Polso
TM
Watch measurement.
1.
Place your hand with the Polso
TM
Watch on a table or desk, near
chest level.
2.
Initiate measurement by placing
and continuously holding your
thumb on the ECG Finger Sensor
as
shown.
3.
The Polso
TM
Watch will then emit 1
vibration notification to confirm
measurement initiation.
7 The Polso
TM
Watch display will show the
measurement screen, with an ongoing PPG
signal and a status message.
A long green bar indicates high signal
quality, medium yellow indicates moderate
quality and short red poor quality.
8
End of Blood Pressure initialization
1.
When the results screen appears on
the Polso
TM
Watch, the patient can
remove their thumb.
2.
Two short vibrations confirm the end
of measurement.
