![ChroniSense Medical Polso 1865501 Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/chronisense-medical/polso-1865501/polso-1865501_instructions-for-use-manual_2605729022.webp)
page 21 of 47
Taking a Measurement
The Polso
TM
Watch is designed for spot checks of blood pressure, pulse rate, SpO
2,
and
respiration rate.
Before taking a measurement make sure that the Polso
TM
Watch is correctly positioned.
Measurements should be taken while sitting still and not talking.
1 You should sit comfortably, not talk, and
avoid movement while taking a Polso
TM
Watch measurement.
1.
Place your hand with the Polso
TM
Watch on a table or desk, near chest
level.
2.
Initiate measurement by placing and
continuously holding your thumb on
the ECG Finger Sensor
as shown.
3.
The Polso
TM
Watch will then emit 1
vibration notification to confirm
measurement initiation.
2 The Polso
TM
Watch display will show the
measurement screen, with an ongoing
PPG signal and a status message.
A long green bar indicates high signal
quality, medium yellow indicates
moderate quality, and short red poor
quality.
3 If you have selected the option to display
partial settings (see chapter 7 Settings),
the Polso
TM
Watch display will cycle
between available results and the
measurement screen.
Incomplete measurements will be
represented by a dotted line.