Chromcraft HCU 38, Руководство по эксплуатации

Страница: 8 / 14

HAND CONTROLLER UNIT #38 FUNCTIONS for JK35-2T MECHANISMS
LCD SCREEN notes positions in bottom of screen.
MEMORY M1 or M2: PRESS & HOLD BUTTON FOR 3
SECONDS. ONCE LCD CONFIRMS OR MESSAGE SAYS,
“SAVED M1 POSITION SUCCEED”, THEN IT REMEMBERS
THIS PRE- SET POSITION.
CUSTOM CONTROL:
•
PRESS AND HOLD OR FOR HEADREST POSITION.
•
PRESS AND HOLD OR FOR FOOTREST POSITION.
•
PRESS AND HOLD OR FOR RECLINE BACK POSITION.
HOME: PRESS AND RELEASE. GOES TO
ORIGINAL PRE-SET HOME POSITION
.
LIFT: PRESS AND HOLD. GO TO DESIRED
POSITION THEN RELEASE. GOES TO UPRIGHT
LIFT FOR EASE OF GETTING OUT OF CHAIR.
ZERO GRAVITY: PRESS AND RELEASE. GOES INTO
RELAXED POSITION OF BODY AT 127 D/- 7
FOR ZERO GRAVITY.
YOGA FLEXX: PRESS & RELEASE 1 time- to go for 5 MINUTES, PRESS 2 times for 10
MINUTES, PRESS 3 times for 15 MINUTES, PRESS the 4
TH
TIME- to STOP.
(This is a CYCLED INTERVAL MOTION for spinal stress-reducing relaxation.)
ZERO GRAVITY PLUS (ZG+): PRESS AND
RELEASE. GOES TO PRE-SET ZERO GRAVITY
PLUS POSITION. (THE BACK WILL LAY DOWN
MORE THAN THE ZERO GRAVITY POSITION.)
USB PORT on top to charge phone, Pad, etc.
LUMBAR: PRESS OR TO DESIRED
PRESSURE ON LOWER BACK.
IF YOU PRESS ANY BUTTON DURING MOVEMENT, THE OPERATION STOPS.
PRESSING ANY BUTTON CAN BE USED FOR EMERGENCY STOP OPERATION.
NOTICE
38
8