Chromcraft HCU 38, Руководство по эксплуатации

Страница: 6 / 14

WARNING
-To reduce the risk of injury:
Do not operate the chair until the
back is installed and locked with
hand controller in center back
pulled through opening.
BACK ASSEMBLY
.
•
To install the back; Align the back brackets with the body brackets. (figure 1).
•
The back brackets will be in the outside or inside of the back assembly.
•
Lower the chair back onto the body, making sure the back and body brackets are
completely engaged.
•
Push the locking levers down to lock the brackets (figure 2).
•
Take protective wrap off hand controller. It can distort the function of the positions. Do not
plug in until all connections and back are in place. Do not sit in chair until it is activated using
the hand controller unit (
HCU ). For activation please see page 7.
•
For fabric and leather care and cleaning instructions, visit www.chromcraft-revington.com or
www. comfortnmotion.com under CARE and ASSEMBLY or refer to dealer.
screwdriver
6
Body
bracket Back
bracket