Chromcraft HCU 38, Руководство по эксплуатации

Страница: 12 / 14

HCU #38 for 4 motor system – JK35-2T with JK1158 headrest & lumbar
ELECTRICAL CONNECTIONS AND PARTS:
Step 1 - plug hand controller wire to control box. Match #1 to #1.
Step 2 - plug the black wire from the wire of main motor #2 to the control box marked #2.
Step 3 - plug the blue wire from the wire of sub motor #3 to the control box marked #3.
Step 4 - plug the power cord into the power adaptor from the control box.
Step 5 - plug headrest motor black wire to black wire connector from control box. Then
plug lumbar blue wire to blue wire connector from control box. These two wires come from
same opening of control box to easily identify.
Step 6 – then plug into wall outlet with the transformer low voltage plug.
Power
adaptor
with back up
battery then
plug into
wall outlet
with the
transformer
low voltage
plug
Hand controller unit-
HCU #38
Unwind
94”
long
Step 6
Put HCU in center of seat &
pull down into the center
back before back rest is
applied and locked down.
Step 1
Step 4
Step 2
Step 3
Step 5
Control
box
8 foot long
Note: match up color
coded wires of blue and
black with its connectors.
12
43”
long