background image

 
 

Disclaimer 

The information contained herein is offered in good faith and is believed to be accurate. However, 
because  conditions  and  methods  of  use  of  our  products  are  beyond  our  control,  this  information 
should not be used in substitution for customer's tests to ensure that Chroma-Q products are safe, 
effective, and fully satisfactory for the intended end use. Suggestions of use shall  not  be taken as 
inducements to infringe any patent. Chroma-Q sole warranty is that the product will meet the sales 
specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty 
is  limited  to  refund  of  purchase  price  or  replacement  of  any  product  shown  to  be  other  than  as 
warranted. 

Chroma-Q reserves the right to change or make alteration to devices and their functionality without 

notice due to our on-going research and development.  

The  Chroma-Q  Inspire  External  Control  Box  UL924  has  been  designed  specifically  for  the  lighting 
industry. Regular maintenance should be performed to ensure that the products perform well in the 
entertainment environment. 

If you experience any difficulties with any Chroma-Q products please contact your selling dealer. If 
your selling dealer is unable to help please contact [email protected]. If the selling dealer is 
unable to satisfy your servicing needs, please contact the following, for full factory service: 

Outside North America:               North America: 

Tel: +44 (0)1494 446000 

             Tel: 416-255-9494 

Fax: +44 (0)1494 461024 

             Fax: 416-255-3514 

[email protected] 

             

[email protected]

 

 
For further information please visit the Chroma-Q website at www.chroma-q.com. 

Chroma-Q and Inspire Mini Terminal Strip are trademarks, for more information on this visit 
www.chroma-q.com/trademarks.  

The rights and ownership of all trademarks are recognised. 

Important Notice: 

As per the requirements in the Occupational Safety and Health Administration standards for product 
approval,  please  refer  to  the  OSHA  web  pages  http://www.osha.gov/dts/otpca/nrtl/  for  information 
on the list of Nationally Recognized Testing Laboratories (NRTLs) and the scope of recognition. 

  

 
 
 
 
 

Содержание Inspire UL924























Отзывы: