Magic Box EtherSwitch 7 User Manual
6
V1.1 September 2012
www.chroma-q.com
2.5
Installation
Unique Magic Box interlocking enclosure facilitates easy rack mounting when used in pairs and easy truss mounting via
captive nut insert. Rack mounting brackets are available in single unit and dual unit versions.
Note:
for truss mounting, we recommend the use of a ½"-13UNC x ¾" long bolt to avoid damage.
3.
Troubleshooting
Troubleshooting is a process of elimination. First, rule out the other field factors (i.e. bad connections, faulty cables and
power supplies). For technical advice and/or parts, please contact your selling dealer or the offices listed in this manual.
Symptom
Possible Cause
Solution
LED indicator for power is off.
Power cord is not connected properly.
There is no power at the source.
Check power source, power cord and
connector.
Speed LED lights amber upon cable
diagnostic.
Loose connection; damaged cable;
damaged connector;
no connection.
Replace damaged cable.
Check connector.
Speed LED lights is off.
No connection detected.
Poor connection. Possible
transmission fault at the source.
Electronics fault in unit if it is
connected to a 100/1000Mbps
Ethernet device.
Check connection/connectors.
Check Ethernet device.
Call selling dealer.
4.
Specification
4.1 Technical specifications
Product Code:
CHES07F
Dimensions:
280mm x 220mm x 88mm
11" x 8.6" x 3.5"
Weight:
3.5kg / 7.8lbs
Power:
100-240V AC, 50-60Hz, 0.4A
Power connector:
IEC
Ethernet Switch Type:
Intelligent store & forward
Ethernet Protocols:
All IEEE 802.3
RJ45/EtherCon Port:
Shielded 10BaseT/ 100BaseTX/ 1000BaseT
RJ45/EtherCon:
Auto-negotiation
RJ45/EtherCon MDI/MDIX:
Auto-crossover
RJ45/EtherCon TD and RD polarity:
Auto-polarity
OpticalCon Port:
1000 Mbps
MAC Addresses Supported:
8192
VLAN Supported:
4096
Jumbo Frame Support:
up to 9.6K
Buffer Memory:
144 Kbytes
Memory Bandwidth:
16 Gbps for full wire speed on all ports
