6
How to operate your C65 Super Compressor
6
For a superior water resistance your crown is of the screw-down
type. The crown should sit flush to the case (position
1
) in order
to maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2
for winding in power. Wind in a clockwise direction to re-power
the watch. Your C65 Super Compressor has a maximum power
reserve of 38 hours when fully wound. Normal wearing will allow
the rotor to start re-powering the watch overtime after putting
on your wrist. After a period of non-use we recommend that
you manually wind the watch at least 20 times to ensure there
is sufficient power in the watch before the rotor maintains the
power.
• Pull gently into position
3
. This position is used for handsetting
and stopping of the seconds hand. For precise time setting it is
recommended to pass beyond the desired minute and to set
the hand backwards.
Setting the time
