23
English
Installation instructions
Put everything clearly on the ground and control the comple-
teness based on the assembly steps.
Some screws are already at the mounting locations for an
easy assignment. Assembly time is approximately 40 min.
Step 1:
1. Remove all small parts, loose packing material out of the box
and then take out with help of a second person the base frame
(1) of packaging. Don’t cut the cable ties for removal yet!
Step 2:
1. Now cut the cable ties and don’t move the treadmill anymore
for assembly. Put the right and left base cover metal plates
(12L+R) at front side of base frame (1) and tighten them with
screws M8x15 (62) and washers 8//16 (79).
Step 3:
1. Lead the right support tube (3R) with the inserted connection
cables (93+101) to the right side of base frame (1) and connect
with suitable plugs of cables (91+100) projecting from base fra-
me (1).
2. Insert the right support tube (3R) into the base frame (1) (wit-
hout squeezing a cable) so that the holes pattern and screw the
connection tightly with screws M10x15 (58) and washers 10//20
(78).
3. Lead the left support tube (3L) with the inserted connection ca-
ble (92) to the left side of base frame (1) and connect with suita-
ble plug of cables (90) projecting from base frame (1).
4. Insert the left support tube (3L) into the base frame (1) (without
squeezing a cable) so that the holes pattern and screw the con-
nection tightly with screws M10x15 (58) and washers 10//20
(78).
