17
Step 5:
Attach the pedal
1.
Attach the pedal straps to the pedals (33R/33L).
NOTE: The end with four adjustable holes must be set outwards.
2.
The pedals (33R/33L) are marked with „R“ & „L“
NOTE: Right and Left are specified as viewed seated on the machine
during training.
Connect each pedal (33R/33L) to the matching crank arm (34+88)
(NOTE: The right pedal „R“ should be threaded on clockwise. The
left pedal „L“ should be threaded on counter-clockwise.)
Step 6:
Attach the power
1.
Please insert the plug of adaptor (35) to the jack of chain guard.
2.
Please insert the adaptor (35) to the jack of wall power.
Step 7:
Checks
1.
Check the correct installation and function of all screwed and plug
connections.
Installation is thereby complete.
2.
When everything is in order, familiarize yourself with the machine at
a low resistance
Setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
Step 4:
Step 4:
Step 4:
Step 4:
Step 4:
Attach the handlebar and computer
1.
Put the plug of middle section motor cable (14) into the socket from
monitor (22) backside.
2.
Attach the monitor (22) to top monitor bracket of front post (13) with
screws (23). (Attention: Ensure that the cable loom are not crunched
or pinched during installation.)
3.
Attach the handlebar (27) with hand pulses (26) to welded clamp of
front post (13) and secure with clamp, clamp decoration cover (28)
and star grip screw (32) in your desired position. Fix the decoration
cap (28) with screw (30).
4.
Insert the plug of hand pulse wire (24) to the jack of the monitor (22).
Attach the handlebar covers (28 + 29) with screws (30 + 31).
English
Содержание 9805
Страница 3: ...3 Deutsch ...
Страница 4: ...4 ...
