16
Assembly Instructions
Before beginning assembly, be sure to observe our recommendat-
ions and safety instruction. Remove all the part of your cycle from
the carton and place them on the floor carefully.
Some parts are pre-assembled.
Step 1:
Attach the stabilizer
1.
Attach the rear stabilizer (8) assembled with 2 rear cross bar caps
(9) and 2 adjustable knob (41) to main frame (1), using 2 allen head
bolts (10), 2 washers (5) and 2 spring washers(6).
You can use adjustable knob (41) to level the bike.
2.
Attach the front stabilizer (2) assembled with 2 front cross bar caps
(3) to main frame (1), using 2 carriages bolts (4), 2 washers (5), 2
spring washers (6) and two cap nuts (7).
Step 2:
Attach the seat and seat post
1.
Slide the plastic collar (17) to cover the seat post (16).
2.
Insert the seat post (16) to seat post mounting tube of main frame
(1) and secure in position with the seat post quick release (21).
3.
Put the clamp of seat (19) to the seat slide post (18A) and tighten
the seat firmly into your desired position.
4.
After assembling the seat slide post (18) at the seat post with was-
her (42) star grip nut (20), you can move the hole of seat slide post
to adjust your desired position.
Step 3:
Attach the front post
1.
Remove the pre-assembled 4 allen head bolt (10), 4 washers (5)
and 4 spring washers (6) from main frame(1).
2.
Attach the front post (13) to the front post mounting tube of main
frame (1) and connect the plug of middle section motor cable (14) to
the socket of the motor cable (15).
3.
Insert the front post (13) to main frame (1) and secure, using 4 allen
head bolts (10), 4 spring washers (6) and 4 washers (5).
Содержание 9805
Страница 3: ...3 Deutsch ...
Страница 4: ...4 ...
