Christopeit Sport 9131, Инструкция по сборке и использованию

Страница: 17 / 56

17
Step 4:
Attach the handlebar (7) at handlebar support (63).
1. Guide the preassembled handlebar unit (7) through the upper part of the
handlebar post (63) with pulse cable (3) behind the handlebar support and
close the bracket of handlebar holder.
2. Screw the handlebar (7) in desired position at the handlebar post (63) with
spacer (8) and handlebar screw (9).
Step 5:
Attach the saddle (11) at saddle slide (13).
1.
Push the saddle (11) with saddle bracket into the saddle slide (14) and
tight it up in desired position.
2. Place the saddle slide (13) into the holder of saddle post (17), set it at
the desired position and screw it onto the saddle support (17) by screw (12)
washer (15) and star grip nut (16).
Step 6:
Attach the saddle support (17) at main frame (32).
1.
Push the saddle support tube (17) into the matching locator in the main
frame (32), set it at the desired position and lock it by inserting the bolt with
the quick release (19) in place and doing it up tight.
(The setting of the saddle support can be adjusted easily as desired later
through turning and pulling the quick release (19).) Furthermore, you must
ensure when setting this desired position that the seat pillar is not pulled out
of the main frame further than the highest setting position, which is marked.