Downloaded from Projector.com
You can select and set up the following items from the DISPLAY menu.
■
Resizing
You can select whether to display the picture in real mode (with the same
resolution as the input signal) or in resizing mode (converting it to the same
XGA size as the LCD panel).
Select by pressing the
and
adjustment buttons.
The factory default setting is [On].
■
Language
You can select the language of the menu display.
Select by pressing the
and
adjustment buttons.
■
Video Standard (VIDEO/COMPONENT only)
You can select the video broadcasting format. For normal use, set on
[AUTO]. Select by pressing the
and
adjustment buttons.
The factory default setting is [AUTO].
■
Source Status
You can select the method of displaying the status of the input source as
follows.
1) On
The source and mode status are displayed. The display disappears after a
few seconds. When there is no signal, the [NO SIGNAL] message is
constantly displayed.
2) Off
The input source status is not displayed.
Select by pressing the
and
adjustment buttons.
The factory default setting is [On].
■
Overscan (VIDEO/COMPONENT only)
When there is interference at the top of the video screen, etc., you can adjust
the picture so that that part is not visible. Select by pressing the
and
adjustment buttons.
The factory default setting is [Standard].
■
Component Selection
You can select whether to connect a component to the RGB/COMPONENT
terminal.
1) On
When you select [On] on the RGB DISPLAY menu, the input source switches
to COMPONENT, and the COMPONENT DISPLAY menu will appear.
2) Off
When you select [Off] on the COMPONENT DISPLAY menu, the input
source switches to RGB, and the RGB DISPLAY menu will appear.
Select by pressing the
and
adjustment buttons.
To select the input source, see “Selecting the Desired Image” on page 19.
The factory default setting is [Off].
■
Component Display (COMPONENT only)
You can select Normal (aspect ratio of 3:4) or Wide (aspect ratio of 9:16) for
the COMPONENT input signal.
Select by pressing the
and
adjustment buttons.
(VIDEO DISPLAY Menu)
(RGB DISPLAY Menu)
DISPLAY
Resizing
On
Off
On
Off
Source Status
Language
English
: Select
ENTER : Next
Component Selection
On
Off
DISPLAY
Resizing
Language
Video Standard
Source Status
Overscan
Component Selection
On
English
AUTO
Off
On
Off
On
Off
Standard
Medium
Maximum
: Select
ENTER : Next
Setting DISPLAY
(Language)
(Video Standard)
: Select MENU : Return
Language
English
Français
Español
Italiano
Deutsch
: Select MENU : Return
Video Standard
AUTO
NTSC
PAL
SECAM
PAL60
(COMPONENT DISPLAY Menu)
DISPLAY
Resizing
Language
Video Standard
Source Status
Overscan
Component Selection
On
English
AUTO
Off
On
Off
Component Display
Normal
Wide
On
Off
Standard
Medium
Maximum
: Select
ENTER : Next
27
