Christie TVC-700, Руководство пользователя

Страница: 32 / 44

Connect the Processor
26 TVC-700 User Manual
020-100906-01 Rev. 1 (03/13)
Connect Peripheral Devices
1. Connect the keyboard and mouse to the USB ports on the back of
the TVC-700 processor.
2. Connect the CAT5 Ethernet cable(s). This step is only required if
you are connecting to 1 or more networks.
3. Connect any peripheral devices, such as USB or serial components
to the appropriate connectors on the rear and/or front panel.
Connect Power
Connect the approved rated line cord, supplied with the processor, to the
AC inlet of the power supply on the rear panel and connect the 3-
pronged end of the line cords to a grounded AC outlet. The input voltage
must be capable of 100-240 VAC, 60/50 Hz, 4A. The TVC-700 processor
comes standard with 2 hot plug redundant power supplies.
The line cords provided with the processor will be the correct
cord for the country for which this product has been ordered.
Do not attempt to operate the processor if the AC supply and
power cord are not within the specified voltages and power
range. This equipment must be grounded to a reliable earth
ground. The ground must be installed in accordance with
local electrical safety standards.
This product can be connected to an IT power distribution
system.
Failure to comply could result in death or serious injury.