manualshive.com logo in svg

Christie TVC-700, Руководство пользователя

Поделиться
Скачать
Christie TVC-700 Скачать руководство пользователя страница 10

Introduction

4

TVC-700 User Manual

020-100906-01 Rev. 1 (03/13)

Reset

The reset button should not be used unless pressing Power fails 
to shutdown the system.

Control Panel LEDs

The control panel located on the front of the chassis has several LEDs. 
These LEDs provide you with critical information related to different 
parts of the system. This section explains what each LED indicates when 
illuminated and any corrective action you may need to take.

HDD

Indicates hard drive and/or DVD-ROM drive activity when 
flashing.

NIC1

Indicates network activity on the LAN1 port when flashing.

NIC2

Indicates network activity on the LAN2 port when flashing.

Overheat/Fan Fail:

When this LED flashes, it indicates a fan failure. When on 
continuously it indicates an overheat condition, which may be 
caused by cables obstructing the airflow in the system or the 
ambient room temperature being too warm. Check the routing 

of the cables and make sure all fans are present and operating normally. 
You should also check to make sure that the chassis covers are installed. 
Finally, verify that the heatsinks are installed properly. This LED will 
remain flashing or on as long as the indicated condition exists. 

Содержание TVC-700













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды