Christie TVC-1211, Руководство пользователя, Страница: 25 / 46

Section 3: Connecting the Controller
TVC-1211 User Manual 3-5
020-100769-01 Rev. 4 (05-2012)
3.3.2 16-slot Expansion Chassis Channel Numbering
3.4 Connect Devices
Input and display modules are only installed in the expansion chassis.
3.4.1 About Source Connections
NOTICE:
When installing new or replacement component(s) into your existing controller, read the Service
Manual(s) provided with the new module(s) before beginning. The information provided in this chapter is not
sufficient for proper installation and module configuration for the TVC-1211 series controller.
The controller comes pre-configured according to your specifications. You should be able to connect your
sources and display content on the display wall when the unit is unpacked. This section provides a high-level
overview of the capabilities of the modules available for this controller. It also touches on some system
configuration information. All input and display modules are clearly labeled.
Composites and S-Video Sources
Composite and S-video sources can be connected to V16A modules.
PCIe
Host Card
ES1
6SF Slave
Card
EE16SF Extender
Car
d
*
V16A
(65-96
)
V
16A
(33-64)
V
16A
(1-32)
D4A
(1-4)
D4A
(5-8
)
D4A
(9-1
2
)
D4A
(
13-16)
D2R2 (1-2)**
D
2
R
2
(3-4)**
D2R2 (5
-6)**
D
2
R2 (7-
8
)**
*only required if more than 1 expansion chassis are connected.
**D2R2 cards installed in 64 bit slots (9-16) left to right