manualshive.com logo in svg

Christie TruLife+ Griffyn 4K32-RGB, Инструкция по установке и настройке

Поделиться
Скачать
Christie TruLife+ Griffyn 4K32-RGB Скачать руководство пользователя страница 30

6. To focus the right boresight guide, adjust the green boresight screw.
7. To focus the left boresight guide, adjust the yellow boresight screw.
8. To continue to refine the focus, repeat steps 5 to 7.
9. Before adjusting the stabilization screws, close the shutter.
10. To maintain the adjustments, lock the stabilization screws.

When locking the screws, start with the top stabilization screw and turn it so it just touches the
base. Repeat for the other two stabilization screws. Continue to adjust the locking screws until
they are tight.

11. Open the shutter.

Optimizing the integrator zoom and focus

1. From the Test Pattern menu, select the Integrator Rod test pattern.

2. Open the Service door on the side of the projector.
3. Remove the zoom and focus cover and rotate it out of the way.

Installation and setup

Griffyn 4K32-RGB Installation and Setup Guide

30

020-103314-05 Rev. 1 (04-2021)

Copyright 

©

 2021 Christie Digital Systems USA, Inc. All rights reserved.

Содержание TruLife+ Griffyn 4K32-RGB














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды