Christie TruLife+ Griffyn 4K32-RGB, Инструкция по установке и настройке

Страница: 10 / 77

• A—Hazard zone. The region of space where the projection light from the projector is above
emission limits for Risk Group 2. The light intensity may cause eye damage after a momentary
or brief exposure (before a person can avert his or her eyes away from the light source). The
light may cause skin burns to occur.
• B—Hazard distance. Operators must control access to the beam within the hazard distance or
install the product preventing potential exposure of the spectators' eyes from being in the
hazard distance.
• C—No access zone. Horizontal clearance of the no access zone must be a minimum of 2.5
meters.
• D—Vertical distance to hazard zone. The hazard zone must be no lower than 3.0 meters above
the floor.
• E—Represents the top view of the projector.
• F—Represents the side view of the projector.
The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to
its most hazardous position.
Projection Lens Part Number Hazard Distance (m)
High brightness
0.37:1 enhanced 144-136101-XX 1.0
0.72:1fixed 144-110103-XX 1.0
0.9:1 fixed 144-111014-XX 1.2
1.13-1.31:1 zoom 144-103105-XX 1.7
1.13-1.66:1 zoom 144-129103-XX 2.2
1.31-1.63:1 zoom 144-104106-XX 2.1
1.45-2.17:1 zoom 144-130105-XX 2.8
1.63-2.17:1 zoom 144-105107-XX 2.8
1.99-2.71:1 zoom 144-106108-XX 3.4
2.71-3.89:1 zoom 144-107109-XX 4.9
3.89-5.43:1 zoom 144-108100-XX 6.9
Ultra high contrast
0.72:1 fixed 163-116109-XX 1.0
0.9:1 fixed 163-117100-XX 1.0
1.13-1.66:1 zoom 163-118101-XX 1.8
1.45-2.17:1 zoom 163-119102-XX 2.4
1.95-3.26:1 zoom 163-120103-XX 3.4
2.71-3.89:1 zoom 163-121105-XX 4.1
3.89-5.43:1 zoom 163-122106-XX 5.8
Introduction
Griffyn 4K32-RGB Installation and Setup Guide 10
020-103314-05 Rev. 1 (04-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.