Moving the panel left and right
Slide the panel to the left or right to align it with the panel to the side.
1. Using a Phillips screwdriver, loosen the security screws holding the panel adapter brackets onto
the wall mount.
2. Slide the panel to the left or right as necessary.
3. Tighten the security screws.
Extending the adapter brackets
To access the rear of the panel, pull the panel away from the wall mount.
1. To pull the LCD panel away from the wall mount, lift the locking tabs.
To access the locking tabs for a mount, it may be necessary to extend the adapter brackets of
the LCD panels above it.
To avoid damaging the LCD panel always release both locking tabs at the same time and move
the panel forwards evenly.
Installing flat panels on the ML20 wall mount
Installing Flat Panels on the ML20 Wall Mount Instruction Sheet
9
020-102525-01 Rev. 1 (02-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.
