Related documentation
Additional information on the LCD panels is available in the following documents.
•
FHD553-XE and FHD553-XE-H User Manual (P/N: 020-001183-XX)
•
FHD553-XE-R and FHD553-XE-HR User Manual (P/N: 020-001198-XX)
Assembling the wall mount
Combine the vertical supports and the cross bars to create the wall mount.
1. Align the top cross bar with the right and left vertical support.
2. Secure each end of the cross bar and vertical supports with a washer and nut.
3. Before tightening the washer and nut, adjust the width of the wall mount to the size of the LCD
panel.
For the FHD493-XE panel, the wall mount must be fully collapsed. For the FHD553-XE panel,
the wall mount must be fully expanded.
4. Tighten the washer and nuts.
5. Repeat steps 1 to 4 for the bottom cross bar.
Installing the wall mount
Learn how to install the wall mounts onto different surfaces.
The maximum load capacity of the wall mount is 75 lbs (34 kg).
When installing the wall mounts, ensure there is proper spacing between the mounts to accommodate
the panels. Always start with the bottom left display in the array.
1. Measure the width and height of the display panel.
2. Locate the center of the bottom left display.
55" panel
49" panel
Installing flat panels on the ML20 wall mount
Installing Flat Panels on the ML20 Wall Mount Instruction Sheet
4
020-102525-01 Rev. 1 (02-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.
