Christie Mirage 4K40-RGB, Техническое описание

Страница: 7 / 21

Use the LVPS status table to help determine a resolution.
LED status Output status Action
Solid green DC Output OK Indicates power to the power supplies. Proceed to
step 3.
Solid orange DC Output OK, in remote
control mode Check the communication (CN2) harness into the
power supply is fully seated and connected.
Slow blinking green Output Not Enabled There is power but the supply is not enabled.
Check the communication (CN2) harness into the
power supply is fully seated and connected.
Fast blinking red Over Voltage Too much power is coming into the power supply.
Ensure a certified electrician checks the line voltage
and supply from the wall.
Solid red Over Loaded A potential short in the output of the power supply
occurred.
Inspect the DC (secondary) harnesses are fully
seated and connected.
Inspect the boards to ensure they are
functioning.
Slow blinking red Over Temperature The power supply has over heated.
Potential air blockage. Inspect the air intake to
the power supply and clear any blockages.
Check if the projector is operating in the
specified projector temperature range.
4K40-RGB troubleshooting
4K40-RGB Technical Reference–Troubleshooting 7
020-103239-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.