Christie Matrix SIM, Руководство по установке

Страница: 9 / 60

Matrix StIM/SIM Setup Guide 1-1
020-100397-02 Rev. 1 (11-2012)
1 Introduction
1.1 Using this Manual
This manual is intended for trained users authorized to operate professional high-brightness projection
systems. Only Christie accredited personnel trained specifically by Christie on light module replacement and
safety may handle the light module.
Disclaimer: Every effort is made to make sure the information in this document is accurate and reliable. However, due to constant research, the
information in this document can change without notice. Christie Digital Systems USA, Inc. assumes no responsibility for omissions or inaccuracies.
Updates to this document are published regularly, as required. Please contact Christie Digital Systems USA, Inc. for availability.
1.1.1 Labels and Marking
Observe and follow all warnings and instructions marked on the projector.
Danger symbols indicate a hazardous situation which, if not avoided, will
result in death or serious injury.
Warning symbols indicate a hazardous situation which, if not avoided, could
result in death or serious injury.
Caution symbols indicate a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE!
Information provided with this heading alerts users to key points of interest where equipment
damage may be possible, but not related to personal injury.
1.1.2 Safety Warnings and Guidelines
Be aware of the caution label on the projector warning of
possible eye hazard if the projected visible and invisible LED
radiation light is viewed directly through certain optical
instruments at close range.
The projector is a class 2M source of visible and
invisible LED radiation. Directly viewing the LED
output with certain optical instruments (for example,
eye loupes, magnifiers and microscopes) within a
distance of 100 mm (3.94”) may pose an eye hazard.