Christie Matrix SIM, Руководство по установке

Страница: 35 / 60

Section 3: Setup
Matrix StIM/SIM Setup Guide 3-15
020-100397-02 Rev. 1 (11-2012)
Reset Weight & Adjustment To Default
Click to reset all weight and adjustments settings to their default values.
IR Brightness Adjustment
Choose an IR Brightness Adjustment.
Minimum RGB Brightness For Constant IR
Choose the minimum RGB brightness necessary to keep the IR brightness constant. This causes the projector
to try to maintain a constant IR brightness even if ColorLOC changes the RGB Brightness down to the
specified minimum. This setting does not apply in interleaved mode because the projector can change the
video source.
Auto Color Enable
When this check box is selected, selecting a specific black level or drive will automatically enable the
corresponding color in the display. Clear the check box to see all colors.
Test Pattern Enable
Select this check box to enable the automatic display of a flat white test pattern when you select the Array
Color Target menu. The test pattern is turned off automatically when you exit the menu.
Manual IR Power
Choose InfraRGB Preset
,
and then choose a
Preset
option. The selected preset sets the values for the IR
Manual Power slider controls. You can use these controls with IRLOC disabled.
• IR Manual Red Power: Controls the IR LED brightness in response to red content (Range is 0 to 255).
• IR Manual Green Power: Controls the IR LED brightness in response to green content (Range is 0 to 255).
• IR Manual Blue Power: Controls the IR LED brightness in response to blue content (Range is 0 to 255).
3.4 Setting Up for Infrared
Infrared display is controlled in the InfraRGB menu. Choose Main Menu
>
Configuration
>
InfraRGB . The
InfraRGB channel is set automatically to RGB Video, and the InfraRGB Source Mode is set to RGB Video.
3.4.1 Choose a Video for IR
For this release, the InfraRGB Source Sequence should be set to Continuous (Main).
3.4.2 Choose a Video Mode
NOTE:
Day light is 100% brightness of the RGB factor of the video source and 100% brightness of the IR factor.
1. To turn IR ON, choose the InfraRGB menu, then select Enable InfraRGB .
2. On the InfraRGB menu, choose Selected Lighting Mode .
3. If you want to change the lighting mode, select the Configure Lighting Mode menu.