Christie LW651i, Руководство по эксплуатации, Страница: 54 / 131

53 LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide
020-000786-0
2
LIT MAN USR D2
Operating
The PbyP / PIP is a function for displaying two different picture signals on a
screen that is separated into main and sub areas for each signal.
PbyP (Picture by Picture) / PIP (Picture in Picture)
PbyP
button
• If the
LAN
port is selected when the
PbyP
button is pressed, input
from other port is displayed on the main area.
• When in the PbyP / PIP mode, use the
MENU
button on the remote control or
▲/▼ buttons on the control panel to display the OSD menu.
• Some functions that cannot be used when in the PbyP / PIP mode.
• A message is displayed when buttons that cannot be used are pressed (

116
).
However, messages are not displayed for some unusable buttons.
• The functions on the OSD menu that cannot be used are displayed in gray
and cannot be selected.
NOTE
Normal mode PbyP mode
main
area
sub
area
(continued on next page)
PIP mode
Press the
PbyP
button on the remote control. This acctivates the PbyP mode.
Then, press the
PbyP
button again. The projector goes into PIP mode. The
screen displayed before the
PbyP
button was pressed is displayed as the main
area. Most of operations are effective for the main area only. Only outputs the
audio input signal paired with the picture input signal for the main area.
To quit the PIP mode, press the
PbyP
button again.
ð
ð
main
area
sub area