Christie LW651i Скачать руководство пользователя страница 123

Страница: 123 / 131

122

LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide

020-000786-0

LIT MAN USR D2

Troubleshooting

Issues that may be easy to be mistaken for machine defects

An issue may be confused with a machine defect, check and deal with it according

to the following table.

Issue

Cases not involving a machine defect

Reference

page

Power does not

come on.

The electrical power cord is not plugged in.

Correctly connect the power cord.

The main power source has been interrupted during
operation such as by a power outage (blackout), etc.

Disconnect the power plug from the power outlet, and

allow the projector to cool down at least 10 minutes, then

turn the power on again.

Either there is no lamp and/or lamp cover, or either

of these has not been properly fixed.

Turn the power off and disconnect the power plug from

the power outlet, and allow the projector to cool down

at least 45 minutes. After the projector has sufficiently

cooled down, confirm the attachment state of the lamp

and lamp cover, and then turn the power on again.

108

Neither sounds

nor pictures are

output.

The signal cables are not correctly connected.

Correctly connect the connection cables.

13 ~ 22

Signal source does not correctly work.

Correctly set up the signal source device by referring to

the manual of the source device.

–

The input changeover settings are mismatched.

Select the input signal, and correct the settings.

AV MUTE function is working.

Press AV MUTE button on the remote control.

(continued on next page)

Содержание LW651i




































































































































Результаты поиска

Содержание LW651i

Отзывы:

Christie LW651i, Руководство по эксплуатации, Страница: 123 / 131

Результаты поиска

Содержание LW651i

Отзывы: