- 17 -
English
020-000409-0
1
Rev.
1
(0
8
-2011)
✔
Note:
• When the Direct On function is set to On, the
projector will be turned on automatically by
connecting the AC power cord to an AC outlet.
• The running speed of cooling fans is changed
according to the temperature inside the projector.
• Do not put the projector in a case before the
projector is cooled enough.
• The projector cannot be turned on during the
cooling period with the POWER indicator turned off.
You can turn it on again after the POWER indicator
becomes green again.
Turning Off the Projector
Power off? disappears after 4 seconds.
Press the ON/STAND-BY button on the side control or
the STAND-BY button on the remote control, and Power
off? appears on the screen.
Press the ON/STAND-BY button on the side control or
the STAND-BY button on the remote control again to
turn off the projector. The LAMP indicator lights bright
and the POWER indicator turns off.
1
2
TO MAINTAIN THE LIFE OF THE LAMP, ONCE yOU
TURN THE PROjECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE THE
READy INDICATOR LIGHTS GREEN AGAIN.
OTHERWISE IT WILL RESULT IN SHORTENING OF
THE LAMP LIFE.
3
4
When the projector has cooled down enough, the
POWER indicator lights green and then you can turn on
the projector.
Unplug the AC power cord from the AC outlet.
DO NOT OPERATE THE PROjECTOR
CONTINUOUSLy WITHOUT REST. CONTINUOUS
USE MAy RESULT IN SHORTENING THE LAMP
LIFE.