Christie FHD651-P, Руководство пользователя

Страница: 30 / 64

22 FHD651-P and FHD651-T LCD Panels User Manual
020-000693-01 Rev. 1 (02-2014)
Installation
c. When you complete the nine-point calibration, a confirmation
window appears. Click Done to accept the calibration; click
Cancel or do nothing (in which case the calibration window
automatically disappears after five seconds) to cancel the
calibration.
Advanced Setting
Click Advanced Setting to display the Advanced Setting window. When you are finished, select
Done to save your changes or Cancel to discard them.
• Right Click Simulation: When this option is enabled, pressing on the screen (as opposed to
tapping it) performs a “right-click” mouse button action. The amount of time the finger must
remain on the touch screen to perform this action is configurable; refer to
Right Click Duration ,
below.
• TUIO (Tangible User Interface Object) Support: Certain applications require access to touch
point messages via the TUIO protocol. Also, certain operating systems require TUIO to provide
multi-touch capability (refer to
Software Requirements (Single-Touch Operation) on page 19).
Therefore, it is recommended that you enable this option.
• Right Click Duration: When Right Click Simulation is enabled, this slider controls how long a
finger press action must be in order for it to be interpreted as a “right-click” action.
• Double Click Speed: This slider controls the maximum duration between two touches in order
for them to be interpreted as a “double-click” action.
• Right/Double Click Range: This slider controls the maximum distance between two touches in
order for them to be interpreted as a “double-click” or “right-click” action.
Reset
To restore all TouchWin configuration settings to their factory defaults and undo the effects of any
previous calibrations, click Reset.
This action is not undoable. Proceed with caution!