Christie FHD651-P, Руководство пользователя

Страница: 29 / 64

Installation
FHD651-P and FHD651-T LCD Panels User Manual 21
020-000693-01 Rev. 1 (02-2014)
Technical Support, this information will help them answer your questions or resolve product
performance issues.
Settings
From this area of the TouchWin configuration window, you can change settings, calibrate the touch
screen or reset the product to its factory-default state.
The following paragraphs describe these settings in detail. When you are finished configuring the
touch screen, click Done to save your changes or Cancel to discard them.
• Mode: Choose one of the following, then click Done.
• MultiTouch: This mode is available only in Windows operating systems that support multi-
touch; the user can interact with the display using multiple fingers simultaneously and
independently of each other. See
Software Requirements (Multi-Touch Operation) on
page 19.
• Mouse: This mode simulates the mouse to process the touch points. Generally, this mode
is single-touch. All of the operating systems listed in the previous section support mouse
mode. See
Installing TouchWin Software (Optional) on page 18.
Calibration
If touching the screen does not place the cursor in the desired position, you may be able to correct
this by performing a touch screen engine calibration. To do this:
a. Click Calibration. A red spot and eight white spots against a black background appear on
the screen.
b. Click the red spot by hand and follow the red spot moving to finish the nine-point touch
calibration.
i
Only click the nine points with a finger on the black screen when calibrating.