Christie FHD651-P, Руководство пользователя

Страница: 17 / 64

FHD651-P and FHD651-T LCD Panels User Manual 9
020-000693-01 Rev. 1 (02-2014)
Installation
Remote Control
To install batteries in the remote control:
1. Press down the tab on the cover and pull the cover up.
2. Insert the included batteries. Ensure that the polarities correctly match the and markings
inside the battery compartment.
3. Insert the lower tab of the cover into the opening, and press down the cover until it clicks in
place.
Notes on Batteries
• Make sure that the battery polarities are correct when installing the batteries.
• Do not mix an old battery with a new one or different types of batteries.
• If you will not use the remote control for a long time, remove the batteries to avoid damage from
battery leakage.
• Do not expose batteries to excessive heat such as from sunshine, fire or the like.
Notes on Remote Control Operation
• Make sure that there is nothing obstructing the infrared beam between the remote control and
the IR receiver on the display.
• If the effective range of the remote control decreases, or it stops working, replace the batteries
with new ones.
• The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight
or fluorescent lighting.
• Ambient conditions may possibly impede the operation of the remote control. If this happens,
point the remote control at the display, and repeat the operation.
Locking and Unlocking the Remote Control
You can lock the remote control buttons to prevent unauthorized persons from changing settings on
the display. To do this, press ENTER, ENTER, EXIT, EXIT, ENTER and EXIT, in sequence. To unlock
a locked remote control unit, use the same sequence of button presses.
Installation must be performed by a qualified custom video installation specialist.