manualshive.com logo in svg

Christie FHD553-XU, Руководство пользователя

Поделиться
Скачать
Christie FHD553-XU Скачать руководство пользователя страница 36

•

Subnet Mask—Sets the subnet mask when the Dynamic IP is disabled, or views the
subnet mask when the Dynamic IP is enabled.
Range: 255.255.255.255 (0.0.0.0)

•

Gateway—Sets the gateway when the Dynamic IP is disabled, or views the gateway when
the Dynamic IP is enabled.
Range: 255.255.255.255 (0.0.0.0)

•

DNS Address—Sets the DNS address when the Dynamic IP is disabled, or views the DNS
address when the Dynamic IP is enabled.
Range: 255.255.255.255 (0.0.0.0)

•

Save Network Settings—If the Dynamic IP is disabled, select Yes to save the network
configuration.

•

Email Alert—Enable or disable any of the following email alerts.

•

Power Status—Send an alert if a display panel is turned on or off.

•

Source Status—Send an alert if a different source is selected.

•

Signal Lost—Send an alert if the input signal is lost.

•

Load Default Settings—Loads default network settings.

•

Refresh—Refreshes the configuration of the Static IP Address, Subnet Mask, Gateway,
and DNS Address.

•

Device MAC—Shows the unique address assigned to network interfaces.

Updating Multi-Display Control settings

Use the Multi-Display Control to display content from a single video source over an entire video wall.
The content is automatically scaled and cropped in each display panel to create a single large virtual
display spanning the full video wall. The Multi-Display Control also allows you to control other
features, such as the removal of the geometric effect of the LCD bezels.
Before using the Multi-Display Control, consider the following.

•

The largest video wall size supported by the Multi-Display Control is 10x10 (or 100 display
panels). If a video wall exceeds this size, use an external video wall controller.

•

If you are using VGA or DVI inputs, the maximum resolution of the video wall is 1920x1080 at
60 Hz.

•

If you are using the HDMI or DisplayPort inputs, the maximum resolution of the video wall is
3840 x 2160 at 30 Hz, or 2560 x 1600 at 60 Hz.

When you use the Multi-Display Control, the identical video signal must be distributed to each display
panel in a video wall. To do this, daisy-chain the display panels together using the video input and
output connectors, or use an external video splitter.

1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > Multi-Display Control.
3. Use the arrow keys to select any of the following controls.

•

Monitor ID—Manually set the Monitor ID of each display panel in a video wall.

•

Video Wall—Enable or disable Video Wall mode. When enabled, each display panel in a
video wall attempts to match its luminance settings with the adjacent panels it is
connected to.

Updating display settings

FHD553-XU User Guide

36

020-001248-02 Rev. 1 (04-2018)

Copyright 

©

 2018 Christie Digital Systems USA, Inc. All rights reserved.

Содержание FHD553-XU




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды