Connecting a VGA source
Learn how to connect a control computer to a display panel using a VGA source.
You cannot daisy-chain multiple panels together using a VGA source connection.
1. Connect a VGA cable to the VGA port on the display panel.
2. Connect the cable to the control computer.
Creating a video wall
Learn how to set up an array of display panels in a video wall.
Connecting video by daisy-chaining display panels
If you are using Multi-Display Control commands, all display panels in a video wall should receive the
same video signal.
You can do this using an external video splitter, or by daisy-chaining up to 16 display panels together
using the DP Out connector.
If you are daisy-chaining the display panels together, consider the following:
•
The DP Out connector on a display panel performs the same function as an external video
splitter.
•
The DP Out connector functions as a repeater for all digital inputs, including DVI In, HDMI 1 In,
HDMI 2 In, and DP In.
•
The DP Out connector does not support VGA In. If your source is VGA, you cannot daisy-chain
display panels together.
•
To daisy-chain display panels, connect a digital source to the first panel in the video wall.
Subsequent display panels can be connected using the DisplayPort cable using the upstream
DP Out and the downstream DP In connections.
•
The maximum number of display panels that can be daisy-chained using the DP Out connector
is 16.
•
If more than 16 display panels are required, daisy-chaining can be used in combination with an
external video splitter.
Installing a display panel
FHD553-XU User Guide
20
020-001248-02 Rev. 1 (04-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Содержание FHD553-XU
Страница 1: ...User Guide 020 001248 02 FHD553 XU ...
Страница 51: ......