manualshive.com logo in svg

Christie FHD493-XE, Руководство пользователя

Поделиться
Скачать
Christie FHD493-XE Скачать руководство пользователя страница 33

3. Use the arrow keys to select one of the following.

•

VGA Only—The display panel wakes up from power-saving mode when it receives an
active video signal on its VGA (analog) input.

•

VGA, Digital, RS232—The display panel wakes up from power-saving mode when it
receives an active signal from its VGA, HDMI, DisplayPort or DVI inputs, or when it
receives a valid RS232 command.

•

Never Sleep—The display panel never enters power-saving mode.

Updating Multi-Display Control settings

Use the Multi-Display Control to display content from a single video source over an entire video wall.
The content is automatically scaled and cropped in each display panel to create a single large virtual
display spanning the full video wall. The Multi-Display Control also allows you to control other
features, such as the removal of the geometric effect of the LCD bezels.
Before using the Multi-Display Control, consider the following.

•

The largest video wall size supported by the Multi-Display Control is 10x10 (or 100 display
panels). If a video wall exceeds this size, use an external video wall controller.

•

If you are using VGA or DVI inputs, the maximum resolution of the video wall is 1920x1080 at
60 Hz.

•

If you are using the HDMI or DisplayPort inputs, the maximum resolution of the video wall is
3840 x 2160 at 30 Hz, or 2560 x 1600 at 60 Hz.

When you use the Multi-Display Control, the identical video signal must be distributed to each display
panel in a video wall. To do this, daisy-chain the display panels together using the video input and
output connectors, or use an external video splitter.

1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > Multi-Display Control.
3. Use the arrow keys to select any of the following controls.

•

Monitor ID—Manually set the Monitor ID of each display panel in a video wall.

•

Video Wall—Enable or disable Video Wall mode. When enabled, each display panel in a
video wall attempts to match its luminance settings with the adjacent panels it is
connected to.

•

Power On Delay—Stagger the Power-On sequence so that monitors do not turn on at
once, reducing current requirements. Select a value from 0 to 30 seconds for each
monitor.

Updating Multi-Display Control settings for a video wall

If you enable the Video Wall setting from the Multi-Display Control settings menu, additional settings

are available.

1. Press MENU on the remote control or keypad.
2. Select Advanced Settings > Multi-Display Control.
3. Use the arrows to turn on the Video Wall setting.
4. Update any of the following settings.

•

Anti-tearing—If you are displaying fast-moving video, this feature can eliminate tearing
artifacts between adjacent rows of display panels in a video wall. If you update anti-
tearing settings, for the changes to take effect, you must turn off the display panels in the

Updating display settings

FHD553-XE and FHD553-XE-H LCD Panels User Guide

33

020-001183-03 Rev. 1 (04-2018)

Copyright 

©

 2018 Christie Digital Systems USA, Inc. All rights reserved.

Содержание FHD493-XE
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды