Christie FHD493-XE, Руководство пользователя

Страница: 14 / 47

• If the infrared remote sensor is exposed to bright sunlight or fluorescent lighting, the remote
control might become unresponsive.
• Ambient conditions might impede the operation of the remote control. If this occurs, point the
remote control directly at the display panel and repeat the desired operation.
Locking or unlocking the remote control
Lock or unlock the remote control buttons to prevent unauthorized individuals from changing the
display settings.
1. On the remote control, press ENTER > ENTER > EXIT > EXIT > ENTER > EXIT to lock the
remote control.
2. To unlock the remote control, enter the same sequence of commands.
Mounting a display panel
Use only the approved wall-mount kit designed for your display panel.
Caution! If not avoided, the following could result in minor or moderate injury.
• TIP HAZARD! Center align the product on the stand or mount.
If you decide to wall-mount a display panel, ensure that the wall-mount bracket is installed according
to the instructions that are included with it. The wall must be capable of supporting three times the
weight of the display panel, or be reinforced.
To ensure the mounting brackets clear any protrusions on the rear of the panel, Christie recommends
using spacers with a minimum height of 6.35 mm (.25 in).
Mounting brackets may block access to the connector ports. To ensure the preferred mount allows
access to the connectors, refer to the display panel line drawings on www.christiedigital.com for
measurements.
Connecting signal to the display panel
You can connect a display panel to video sources, external controllers, and power sources.
Follow these guidelines when you connect equipment to a display panel.
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• For best performance and to minimize cable clutter, use high-quality cables that are only as
long as necessary to connect two devices. For example, avoid using a 20-foot cable if a 6-foot
cable is sufficient.
• Ensure that the cables are securely connected. Tighten all thumbscrews on connectors that
have them.
Installing a display panel
FHD553-XE and FHD553-XE-H LCD Panels User Guide 14
020-001183-03 Rev. 1 (04-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.