Section 2: INTRODUCTION
GS Series User Manual
020-000724-02 Rev. 1 (10-2015)
2-8
2.5
LED Status Indicators
The LED status indicators are located on the right side of the projector. Each
LED is defined below.
• LIGHT
LED
• STATUS
LED
LED Status
Projector State
Red (flashing)
When projector has lost over 60% initial luminance
Orange (solid)
Laser diode time has expired
Green (solid)
Laser diode is on and operating correctly
Off
Laser diode is off
LED Status
Projector State
Off
AC power is off (without AC plug in)
Off, but keypad LED
is on
AC has been applied, projector is in standby mode
Green (solid)
Projector is powered up and operating normally
Green (flashing)
Projector communications
Orange (solid)
Non-portrait mode used
NOTE: Please refer to section 3.5.
Orange (flashing)
Projector is in cool down mode or startup mode
Green (flashing) /
Red (flashing)
Projector is in flash (LAN) update state
Red (solid)
Over-temperature
Red (flashing)
Fan failure