Christie DHD410S, Руководство по обслуживанию

Страница: 50 / 77

Projector covers
DHD410S Service Manual 50
020-001481-01 Rev. 1 (10-2018)
2. Remove the six captive screws and six hex screws with a Phillips #1 screwdriver securing rear
cover.
3. Remove the rear cover from projector.
4. If required, replace the rear cover.
5. To re-install, follow these steps in reverse order.
Removing the bottom cover
To remove the bottom cover, complete the following steps.
1. Remove the top cover.
See Removing the top cover on page 46.
2. Remove the speaker.
See Replacing the speaker on page 66.
3. Remove the rear cover.
See Removing the rear cover on page 49.
4. Remove the left-side cover.
See Removing the left-side cover on page 47.
5. Remove the right-side cover.
See Removing the right-side cover on page 48.
6. Remove the main board, audio board and ECPIO board.
See
Replacing the main board
on page 77.
7. Remove the remove the laser driver board.
See
Replacing the laser driver board
on page 82.
8. Remove the combiner module.
See
Replacing the combiner module
on page 73.
9. Remove the light engine.
See
Replacing the light engine
on page 71.
10. Remove front cover.