Christie DHD410S, Руководство по обслуживанию

Страница: 47 / 77

Projector covers
DHD410S Service Manual 47
020-001481-01 Rev. 1 (10-2018)
5. If required, replace the top cover.
6. To re-install the top cover, follow these steps in reverse order.
Removing the dust filter
The two optional filters are on the left of the projector.
1. Power off the projector and unplug the power cord.
2. Pull out the dust filter, as shown in the illustration (1).
3. Carefully remove the dust filter. Then clean or change the filter in illustration (2).
4. To install the filter, reverse the previous steps.
Removing the left-side cover
The left-side of the projector is determined by facing forward from rear of the projector.
1. Remove the top cover.
See
Removing the top cover
on page 46.