Christie D4K3560, Руководство по установке, Страница: 12 / 36

Installation and Setup
D4K3560 Setup Guide 12
020-101161-05 Rev. 1 (06-2015)
• 19 mm and 7/8” wrenches
• Assorted Allen keys (metric)
• Christie approved protective safety clothing if working with the lamp
• Lens cleaning tissue and solution
Projector components
ID Description
A Touch panel controller
(TPC) A touch-sensitive screen used to control and monitor operation.
B LED status indicators LED color and blinking rates (located in both back corners of the projector)
provide information about the status of the projector using color and blinking
rates. For information about projector states and status, see
Projector LED
status indicators on page 34 .
C Manual douser override Closing the douser rotates a shutter blade in front of the lamp and reduces the
lamp power to 2.0 kW to conserve lamp life. The override is for emergency use
only.
D Lamp door and lamps The lamp door provides access to the lamp compartment and must remain
closed and locked for normal operation. Lamp replacement should only be
performed by qualified technicians. For a complete list of available lamp types,
see the
D4K3560 User Manual (P/N: 020-101075-XX) .
E Exhaust duct and vane
switch Extracts heated air from the lamp compartment. The vane switch mounted inside
the rigid port monitors airflow. See
Site requirements on page 11.
F Liquid cooling air filter
cover and air filter Filters air before it circulates to cool the heat exchanger.
LAMP SIDE
I
A
B
D
E
F
G
H
J
C
LENS SIDE
B