Christie CP2320-RGB, Инструкция по установке и настройке

Страница: 28 / 47

F Indicates marriage status. In full power mode, a green LED indicates that the projector is properly
married and encrypted content can be displayed. A red LED indicates marriage is broken and
encrypted content cannot be displayed.
G Resets the projector electronics. After restarting, the projector returns to its previous power mode.
H Projector LED status indicators
I LED status indicators
J Connects the projector to 3D devices.
K Connects the projector to ingest devices.
L Connects the projector to input devices with an HDMI connection.
M Connects the projector to external automation or automation devices.
N Connects the projector to the touch panel (VGA-Out and Screen Power).
O Management Ethernet port (10/100/1000 base-T) and connects the projector to USB devices,
including the touch panel screen.
P Two Ethernet ports connecting the projector to network-attached storage (NAS) devices and the
Library Media Server (LMS) network, if applicable. The Media port can also be used for content
transfer.
Projector LED status indicators
Identify the LED state colors and meaning.
LEDs Description
Green: Flashes once per second
Yellow: Off
Red: Off Standby mode
Green: Flashes three times per second
Yellow: Off
Red: Off Warm up
Green: Solid
Yellow: Off
Red: Off The power is on, and the lamp is on or off
Green: Solid
Yellow: Flashes once per second
Red: Off Notification
Green: Solid
Yellow: Flashes three times per second
Red: Off Non-critical alarm
Green: Off
Yellow: Off
Red: Flashes three times per second Unacknowledged critical error
Green: Off Acknowledged critical error
Connecting devices to the projector and establishing communication
CP2320-RGB Installation and Setup Guide 28
020-102773-02 Rev. 1 (05-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.