Christie CP2309-RGB, Инструкция по установке и настройке

Страница: 19 / 44

9. Using the four screws, re-attach the knockout plate and ensure the appropriate strain relief is
in place.
Related information
Connecting to an uninterruptable power supply (on page 19)
Connecting to an uninterruptable power supply
An uninterruptible power supply (UPS) allows the cinema projector head electronics to remain
operable during a power failure.
Warning! If not avoided, the following could result in death or serious injury.
• SHOCK HAZARD! The AC power cord must be inserted into an outlet with grounding.
The following table lists the part numbers for the optional UPS power cords for each region.
Power Cord Description Part Number
North America 125V/15A 108-382104-XX
Japan 125V/12A 108-371102-XX
China 250V/10A 108-373104-XX
UK 250V/10A 108-388100-XX
EU/Korea 250V/10A 108-390103-XX
Australia 250V/10A 108-392105-XX
South Africa 250V/10A 108-487100-XX
1. Remove the projector touch panel.
2. Remove the rear cover of the projector by unscrewing the four captive screws.
3. Between the exhaust fans and the AC box assembly, disconnect the MAIN input plug from the
IN-LINE receptacle.
4. Remove the protective cap from the UPS input plug.
5. Connect the UPS input plug to the IN-LINE receptacle connector.
Installing and setting up
CP2309-RGB Installation and Setup Guide 19
020-103078-01 Rev. 1 (06-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.