Modifying a measured color gamut data file
You can change the settings in a measured color gamut data (MCGD) file after it is created.
1. On the touch panel controller (TPC), select Menu > Advanced Setup > MCGD File Setup.
2. From the Current Measured (MCGD) File list, select the MCGD file to edit.
3. Modify the MCGD file settings.
4. Select Save.
Creating a target color gamut data file
Create a target color gamut data (TCGD) file with the settings defined by your content provider.
A colorimeter is required to complete this procedure.
1. Turn on the light source and allow it to operate for 20 minutes.
2. On the touch panel controller (TPC), select Menu > Advanced Setup > TCGD File Setup.
3. Select Save As.
4. In the Filename field type a name for the TCGD file.
5. Select OK.
6. Select Display Test Pattern.
7. To display the red test pattern, in the red area of the chromaticity image select the option
button.
8. Measure the red chromaticity with the colormeter.
9. Enter the red chromaticity values in the x, y, and Gain fields.
10. Select the test pattern that matches the color you are measuring and repeat steps 6 to 8 for
the magenta, blue, white, yellow, and green chromaticity measurements.
11. Select Save.
Modifying a target color gamut data file
You can change the settings in a target color gamut data (TCGD) file after it is created.
1. On the touch panel controller (TPC), select Menu > Advanced Setup > TCGD File Setup.
2. From the Current Target (TCGD) File list, select the TCGD file to edit.
3. Modify the TCGD file settings.
4. Select Save.
Creating a new intelligent lens system file
Create a new file for the intelligent lens system (ILS).
1. On the touch panel controller (TPC), select Menu > Advanced Setup > ILS File Setup.
2. Select Save As.
Managing projector setting files
CP2208 User Guide
51
020-101916-03 Rev. 1 (12-20120)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
Содержание CP2208
Страница 1: ...User Guide 020 101916 03 CP2208 ...
Страница 94: ......
