Christie CP2208 Скачать руководство пользователя

Страница: 13 / 94

Projector components - front

Learn about the components on the front of the projector.

Touch panel
A touch-sensitive screen used to control the
projector.

Air filter cover and air filter
Located behind the air filter cover is a
replaceable air filter.

Communications panel
External devices are connected here.

Projector lens
A list of available lenses is available in the
projector specifications.

Adjustable feet
Turn the adjustable feet to increase or
decrease the projector height.

Lens surround

Air Filter

Top lid

Projector components - rear

Learn about the components on the back of the projector.

Service access door

Power cord and AC receptacle

Light source access door

Lifting and positioning the projector

Safely lift and position the projector in the location where it will be used.

Warning! If not avoided, the following could result in death or serious injury.

•

Do not install or operate the projector in any position that does not meet the stated product
specifications for alignment and orientation.

Position the projector so it is centered and parallel with the theater screen. If space is limited,
aim the projector slightly off-center and use lens offset to center the image on the screen.

Stacking projectors

To stack CP2208 projectors, use the stacking kit provided.
The stacking kit includes these parts:

Installing and setting up

CP2208 User Guide

020-101916-03 Rev. 1 (12-20120)

Содержание CP2208































































































Результаты поиска

Содержание CP2208

Отзывы:

Похожие инструкции для CP2208

Бренды по названию

Популярные бренды

Christie CP2208, Руководство пользователя

Результаты поиска

Содержание CP2208

Отзывы:

Похожие инструкции для CP2208

Бренды по названию

Популярные бренды