Christie Boxer 30, Руководство по обслуживанию

Страница: 69 / 113

Optics
Learn how to replace lamps, mirrors, and other optical components.
Replacing lamp cartridge A or B
The lamp cartridges can be easily accessed from the rear of the projector.
Each Lamp Cartridge contains three lamp modules.
Estimated replacement time: 1 minute for servicing a single lamp cartridge.
B
A
1. Shut down the projector (on page 18).
2. To open the lamp door, loosen the two captive screws and open the door.
3. Loosen the captive screw from the lamp cartridge containing the lamp module you want to
replace.
4. Use the handle to pull out the lamp cartridge.
5. If required, replace the lamp cartridge.
6. To re-install, follow these steps in reverse order
Make sure the captive screw is fully seated (tightened) or a loose connection between the lamp
cartridge and the projector could occur.
Boxer 4K Service Guide 69
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.