Christie Boxer 30, Руководство по обслуживанию

Страница: 111 / 113

1. Remove the front cover (on page 33).
2. Remove the screw securing the affected sensor.
3. Disconnect the appropriate sensor harness connection.
4. Cut the appropriate cable tie to the affected sensor.
5. Remove and replace the affected sensor.
6. If required, repeat steps 1 to 5 for the other sensor.
7. To re-install, follow these steps in reverse order.
Printed circuit boards and sensors
Boxer 4K Service Guide 111
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.