manualshive.com logo in svg

Christie 38-FP0001-01, Руководство пользователя

Поделиться
Скачать
Christie 38-FP0001-01 Скачать руководство пользователя страница 3

2

38-FP0001-02

2

Precautions

Important matters

• Plug the included AC Power Cord to the power supply and voltage as

mentioned in the rating label. IF NOT, DAMAGE TO THE AC POWER
CORD IS A SAFETY RISK AND CAN CAUSE A FIRE.

Placement precautions

• Avoid placing the unit in humid or dusty places, or where it will be exposed

to excessive heat (direct sunlight, heaters, etc.)

• Do not step on or set anything on the AC Power Cord. DAMAGE TO THE

AC POWER CORD IS A SAFETY RISK AND CAN CAUSE A FIRE.

• Install the unit only on a stable and smooth surface.
• Do not connect the unit to the same AC outlet with appliances that

generate large amounts of interference (such as heaters with thermostats,
appliances with motors, etc.). It is best to use a completely separate
electrical outlet.

• Keep the unit away from water or small objects. If they accidentally enters

the unit, unplug the AC power cord immediately. DO NOT PLUG IN THE
UNIT AGAIN.

• Never cover the rear ventilators with cloth or something.

Handling precautions

• "WARNING: The AC power cord and cables on this product contains

chemicals, including lead, known to the State of California to cause cancer,
and birth defects or other reproductive harm. Wash hands after handling."

• Avoid bending, kinking or damaging the AC Power Cord.
• Never insert or remove the power cord with wet hands. Also, be sure to

hold cord by the plug when removing it from the outlet.

• Do not remove any parts that are held in place with screws. (The unit does

not contain any user-serviceable items.)

• Maintain standard room temperature (5˚C to 35˚C, or 41˚F to 95˚F) during

use. Do not subject the unit to shock or vibration. Do not move the unit
while it is in use. 

• A rapid increase in room temperature in cool weather can cause

condensation to form inside the unit. If this occurs, wait at least 15 minutes
after turning the unit on before attempting to operate it.

• Do not attempt to service this monitor yourself as opening unit may expose

you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.

This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety
standards against risk of fire, casualty and electrical hazards.

The CE Mark is a Directive conformity mark of the European Community (EC).

Содержание 38-FP0001-01

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды