manualshive.com logo in svg

Christie 1506, Руководство по продукту и сборке

Поделиться
Скачать
Christie 1506 Скачать руководство пользователя страница 42

Modular Series Cabinet Single, Double and Triple 

(Product numbers 1506, 1511 and 1519)

42

5.4 Assembly and installation 

STEP 5 

1.  Remove the unsecured channel frame from the top of the posts.
2.  Identify the location of the access doors. Do not install panels into this space.
3.  Install the compressed fibre cement and stainless steel fascia panels together as a pair.
4.  With two people, lift the panels and slide them into the channel guides between two 

posts. Repeat this for all remaining panels.

Note: Stainless steel panels will have a protective coating on the outer surface. Peel 
back the protective film slightly along each long edge before installing.

Gas Installations:

If your cabinet has a Gas Bottle Storage kit, locate the 9mm divider panels and pre-drill 
any services holes before proceeding. Slide the panel into place between the two facing 
channels to create a separate compartment for the gas bottles.

FIG. 29

|  

Triple cabinet assembly and installation

Содержание 1506

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды